MIL-C-60898/9(MU)
4.5.2.7
Diodes,
forward
drop.
Connect the AMMETER, item
7 of 4.4.1.1, and the POWER SUPPLY, item 3 of 4.4.1.1, Per
Figure 3 and apply to each set of pins of Table II,
With
the POWER SUPPLY adjusted for an AMMETER reading of 1.0
0.1 AMPERE, measure the d-c voltage between the two printed
current board pins of each step.
Using the DVOM, item 6 of
0,3 vdc.
4.4.1.1, verify that this voltage is 0.9
4.5.2.8
Resistance,
Connect the OHMMETER, item
9 of
4.4.1.1, between pin 16 and pin 18, verify the
resistance
of 3,4.8.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business