MIL-C-60898/4(MU)
REQUIREMENTS
3.
Fabrication.
The assembly shall be manufactured in
3.1
accordance with Drawing F10554185 and drawings pertaining
thereto.
The assembly shall meet the
General specifications.
3.2
requirements of MIL-C-60898.
Environmental service conditions.
See MIL-C-60898.
3.3
Performance at temperature extremes.
For the conditions
3.3.1
of 3.3.2 of MIL-C-6089 8, the foil owing requirements shall be
met for 3.4.
Logic "1" output.
An output logic "1" shall
a)
be greater than +2.5 vdc but less than +4.4 vdc.
b)
An output logic "O" shall
Logic "0" output.
be greater than +0.0 1 vdc but less than +0.4 vdc.
The output voltage of pin 21 shall
Pin 21 output.
c)
1.5 vdc or greater than +0.05 vdc
be either +20
but less than +l.2 vdc, respectively.
d)
The output voltage of pin 6 shall
Pin 6 output.
be either +20.5
1.5 vdc or greater than +0.01 vdc
but less than +1.2 vdc, respectively.
The output voltage of pin 23 shall
Pin 23 output.
e)
be either +18.0
1.0 vdc or greater than +0.01 vdc
but less than +1.2 vdc, respectively.
Electrical performance
3.4
3.4.1 Conditions of operation. The requirements of 3.4.2
and 3.4.3 shall be met with the terminations to the board as
A logic "O"
shown in Figure 1 unless otherwise specified.
input shall be +0.50
0.01 vdc and a logic "1" input shall
be +2.80
0.01 vdc.
An output logic "l" shall be greater
3.4.2 Logic outputs.
An output logic "O"
than +2.8 vdc but less than +4.4 vdc.
Pin
shall be greater than +0.01 vdc but less than +0.4 vdc.
28 shall be ground.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business