MIL-T-48466B(AR)
4.5 Quality conformance inspection.
Performance inspection.
4.5.1
Each assembly in every
4.5.1.1 Performance sample and tests.
lot
shall be subjected to the examinations and tests in Table I
and
shall be examined visually for completeness, improper assembly
evidence of poor workmanship per items 301 and 302 of Table III.
and
The
conditions of 3.3.1 apply.
4.5.1.2 Acceptance. Where any one assembly fails to meet any
specified requirement, the defective assembly shall be removed from
the lot and resubmitted only after all defects have been corrected.
Examination control inspection.
4.5.2
4.5.2.1 Examination control sample and tests. One assembly,
as a control sample, shall be selected at random by the Government
representative from each 100 assemblies produced and shall be
subjected to the tests in Table III.
Where any assembly fails to meet any
4.5.2.2 Acceptante.
Rejected lots
specified requirement, the lot shall be rejected.
shall be resubmitted for reinspection only after all assemblies
are re-examined or retested and all defective assemblies are
removed or defects corrected.
Environmental control inspection.
4.5.3
4.5.3.1 Environmental control sample and tests. One assembly,
as a control sample, shall be selected at random by the Government
representative from each 50 assemblies produced or from each
month's production, whichever occurs first. The assembly shall
be subjected to all the tests in Table IV in the order listed.
Combining of tests is not permitted.
Environmental control tests.
TABLE IV.
Test Procedure
Requirement
Item
Characteristics
4.6.3.2
3.3.3.2
401
High Temperature
3.3.3.2
4.6.3.3
402
Low Temperature
4.6.3.4
3.3.3.3
Vibration
403
4.6.3.5
3.3.3.4
404
Shock
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business