MIL-T-48586 Test Set Assembly, Diode Switch: 11736249

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

MIL-T-48586A (AR)

manufacturer, in one unchanged process, using the same materials

and methods, in accordance with the same drawings, same drawing

revisions, same specifications and same specification revisions.

All material submitted for inspection in accordance with this

specification shall comply with the homogeneity criteria

specified herein, regardless of the type of inspection procedure

which is being applied to determine conformance with

requirements.

4.4.2 Examinations and tests.

4.4.2.1 Components, assemblies and subassemblies.

The contractor's quality program or detailed

inspection plan shall provide assurance of compliance of all

characteristics with the applicable drawings and specifications

utilizing as a minimum the conformance criteria specified in this

document and the Quality Assurance Provisions (QAP) listed in the

Technical Data Package (TDP). In the absence of QAPs, the

applicable quality assurance provisions of MIL-F-13926 shall

apply.

b. Unless otherwise specified herein or provided for

in the contract, alternative quality conformance procedures,

methods or equipment, such as statistical process control, tool

control, other types of sampling plans, etc., may be used by the

contractor when they provide, as a minimum, the level of quality

assurance required by the provisions herein. Prior to applying

such alternative procedures, methods or equipment, the contractor

shall describe them in a written proposal submitted to the

Government for evaluation (see 6.3). When required, the

contractor shall demonstrate that the effectiveness of each

proposed alternative is equal to or better than the specified

quality conformance provisions(s) herein. In case of dispute as

to whether the contractor's proposed alternative(s) provides

equivalent assurance, the provisions of this specification shall

apply. All approved alternative provisions shall be specifically

incorporated into the contractor's quality program or inspection

system, as applicable.

4.4.2.2 Final acceptance inspection. Subsequent to first

article approval, examinations and tests related to Section 3

shall be performed as specified in 4.4.2.3 and 4.5.