MIL-T-48599(MU)
4.3 Inspection provisions.
4.3.1 Submission of product.- Unless otherwise specified herein,
or by the contracting officer, inspection lot size, lot formation and
presentation of lots shall be in accordance with "Submission of
Products" as specified in MIL-STD-105.
4.3.2 Examinations and tests.- Except where otherwise specified
herein, components and subassemblies shall be inspected in accordance
with the "Inspection provisions for components and subassemblies" and
the Sampling Plan Tables contained in MIL-F-13926. Examinations and
tests related to Section 3 herein shall be performed in accordance with
Tables II and III and test methods and procedures in 4.5. Examinations
and tests for packaging, packing and marking shall be in accordance
with MIL-P-14232 and Section 5 herein.
4.3.2.1
Components and subassemblies.- Printed circuit subassemblies
shall be inspected in accordance with the inspection provisions of
MIL-C-60898.
All other components and subassemblies shall be inspected
to the applicable requirements of MIL-F-13926.
4.3.2.2 Control tests.- One chassis assembly shall be selected at
random as a control sample from each 100 produced. The control samples
shall meet the requirements and tests of Table II after they have met
the requirements and tests of Table III.
TABLE II
TEST
REQUIREMENT
TEST PROCEDURES
Fabrication
3.1
Applicable drawings-visual
General specifications
3.2
Visual-tactile
Vibration
3.3.1
4.5.1.1, 4.5.1.2
Temperature
3.3.2, 3.4.3
4.5.1.1, 4.5.1.4
Humidity
3.3.3
4.5.1.1, 4.5.1.3
Shock
3.3.4
4.5.1.1, 4.5.1.5
Altitude
3.3.5
4.5.1.1, 4.5.1,6
Sand and dust
3.3.6
4.5.1.1, 4.5.1.7
Salt Spray
3.3.7
4.5.1.1, 4.5.1.8
Fungus
3.3.8
4.5.1.1, 4.5.1.9
4.3.3 Acceptance and rejection. - Rejected lots shall be screened
for all defective characteristics, Removal or correction of defective
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified in MIL-STD-105.
4.3.4 Functional tests.- The requirements and tests in Table III
shall be inspected on a 100% basis. Unless otherwise specified, all
examinations and tests shall be conducted at the following standard
ambient conditions:
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business