MIL-T-48599(MU)
feet above sea level for a period of not less than one hour, The chassis
assembly shall not be damaged or be adversely affected due to such
exposure.
3.3.6 Sand and dust.- The equipment shall withstand, in both an
operating and nonoperating condition, exposure to sand and dust
perticles as encountered in desert areas.
3.3.7 Salt spray.- Equipment shall withstand, in both an operating
and nonoperating condition, exposure to salt-sea atmosphere.
3.3.8 Fungus-inert materiels.- The requirements for fungus-inert
materiels shall be in accordance with MIL-STD-454, Requirement 4.
3.4 Electrical.
3.4.1 Continuity.- The circuitry shall be in accordance with Wire
Runs List B10554604 and electrical schematic drawing D11748247. The
Wire Runs List shall take precedence over the schematic drawing. The
symbols referenced in subsequent paragraphs pertain to this schematic
and are used therein.
3.4.2 Functional.
3.4.2.1 Resistor Loads.
3.4.2.1.1 Conditions of operations.- Unless otherwise specified
the requirements of 3,4.2.1 shall be met with the conditions as
specified in Table I.
3.4.2.1.2 Resistor load outputs.- When the resistor loads are
supplied with the inputs as specified in Table I, the resistor loads
shall yield the outputs specified in Table I.
TABLE I
D.C. Input Power
J1
D.C. Output Voltage
(Voltage in series with resistor)
Terminals
20.5V + 2%
1%; 7 ohms,
1%, 30W
26 & 32
--
113.9V
2%
227.9V
1%; 649 ohms,
1%, 20W
21 & 32
144.7V
2%
1%; 698 ohms,
1%, 30W
6&27
2%
1%; 11.8 ohms,
1%, 30W
16 & 32
2%
37.6V + 1%; 11.8 ohms,
1%, 30W
19 & 32
109.8V
2%
1%; 201 ohms,
1%, 30W
219.6V
1 & 32
109.8V
2%
219.6V
1%; 201 ohms,
1%, 30W
22 & 32
2%
1%; 30.1 ohms,
1%, low
12 & 18
2%
1%; 15.0 ohms,
1%, 75W
11 & 18
2%
1%; 100 ohms,
1%, 75W
2&4
173.2V
2%
259.8V
1%; 100 ohms,
1%, 75W
3&4
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business