An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Fire Control Maintenance Repair ShpSp Mil-Specs - FSC 4931

MIL-A-47309 - Amplifier, Pneumatic (S/S By Sae-Arp763)

This specification defines requirements for one type of pneumatic amplifier to be used for boosting pneumatic pressure to 10,000 pounds per square inch (psi) and controlling the output pressure from 0 to 10,000 psi.

MIL-A-48449 - Alignment Device, Optical, Gun Bore

This specification covers the M139, M140, M139A1, M140A1 and M154 Alignment Devices which provide a close-in optical reference to check the boresight of the fire control at the weapon site. They each have an illuminated reticle.

MIL-A-50300 - Amplifier, Analog Voltage, 10554887

MIL-A-82478 - Alignment Device, Resolver Mark 1 Mod 0 (For Fire Control System Mark 113 All Mods

MIL-B-48594 - Board Assembly, Component: 11748254

This specification covers component board assembly used in Power Supply Subassembly, PP6324/TPM-22, part of the Radar Test Set AN/TPM-22.

MIL-C-46380 - Case, Combination, Set W/Work Tables, 8625640

MIL-C-48581 - Circuit Card Assembly 11747210 Target Coincidence Board

This specification covers a target coincidence printed circuit board, hereafter called TCB, a part of Range Computer Test Panel, Subassembly MX-8049/TPM-22, a part of Radar Test Set AN/TPM-22.

MIL-C-48582 - Circuit Card Assembly, Target Position Board, 11747198

This specification covers one type of target position printed circuit board assembly, hereinafter identified as "Target Position Board," a part of Range Computer Test Panel, Subassembly MX-8049/TPM-22, a part of Radar Test Set AN/TPM-22 (see 6.1).

MIL-C-48583 - Circuit Card Assembly Target Acceleration Board: 11747207

This specification covers the requirements, examinations and tests for target acceleration printed circuit board assembly, hereinafter identified as target acceleration board (see 6.1).

MIL-C-50759 - Tester, Collimator And Mount. 10559928

This specification covers the Collimator & Mount 10559901 which consists of a collimator and mount. This equipment is referenced throughout this specification as collimator.

MIL-C-50790 - Circuit Card Assemblies, Test Set, An/Mwm-3 General Specification For

This specification covers the general requirements for circuit card assemblies, hereinafter referred to as "assembly," which form a part of the Test Set, AN/MWM-3 (see 6.11).

MIL-C-50790/1 - Circuit Card Assembly, 8438903 (Logic, Digital)

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50790 comprise the complete requirements for the Digital Logic Board.

MIL-C-50790/2 - Circuit Card Assembly, 12004303 (Regulator Board)

MIL-C-50790/3 - Circuit Card Assembly, 8438966 (Circuit, Analog)

MIL-C-60516 - Container, Shipping, Reusable, 7911357 And 7911347

MIL-C-60898 - Circuit Card Assemblies, General Specification For

This specification covers the general requirements for circuit card assemblies, hereinafter referred to as "assemblies", which form part of the Electronic System Test Set type AN/TSM-100.

MIL-C-60898/1 - Circuit Card Assembly, Logic Function Resistors

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Logic Function Resistors Circuit Card Assembly.

MIL-C-60898/10 - Circuit Card Assembly, Power Unit

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60890 comprise the complete requirements for the Power Unit Circuit Card Assembly.

MIL-C-60898/11 - Circuit Card Assembly, Servo Amplifier Test Input

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Servo Amplifier Test Input Circuit Card Assembly.

MIL-C-60898/2 - Circuit Card Assembly, Relay Sense Resistors

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Relay Sense Resistors Circuit Card Assembly.

MIL-C-60898/3 - Circuit Card Assembly, Relay Sense And K12 Operation

This specification covers the detail requirements for one type of circuit card assembly . The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Relay Sense and K12 Operation Circuit Card Assembly.

MIL-C-60898/4 - Circuit Card Assembly, K6 Operation And Sequence

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the K6 Operation and Sequence Circuit Card Assembly.

MIL-C-60898/5 - Circuit Card Assembly, K8 Operation And Sequence

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprises the complete requirements for the K8 Operation and Sequence Circuit Card Assembly.

MIL-C-60898/6 - Circuit Card Assembly, K11 Operation And Sequence

This specification covers the detail requirements of one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the K11 Operation and Sequence Circuit Card Assembly.

MIL-C-60898/7 - Circuit Card Assembly, Relay Signal Inverters

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Relay Signal Inverters Circuit Card Assembly.

MIL-C-60898/8 - Circuit Card Assembly, Noise Suppression

This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Noise Suppression Circuit Card Assembly.

MIL-C-60898/9 - Circuit Card Assembly, Sight Current Generator

This specification covers the detail requirements for one type of Circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-60898 comprise the complete requirements for the Sight Current Generator Circuit Card Assembly.

MIL-C-70512 - Component Board Assembly: 10558242

This specification covers a printed circuit component board, part of Power Supply Test Panel Subassembly MX-8051/TPM-22A, a part of Radar Test Set AN/TPM-22A.

MIL-C-70590 - Control Assembly Test Panel Ts-4215/Tsm-100B: 9361261

This specification covers the Control Assembly Test Panel, hereinafter referred to as the "test set," which forms a part of the Electronics System Test Set AN/TSM-100B (see 6.1).

MIL-F-45812 - Fixture, Test Cycling, 8205556 For Aiming Circle M2, Packaging Of

MIL-F-45813 - Fixture Test, Final Inspection, 8237268; Packaging Of

This specification covers the packaging and packing of Test Fixture Final Inspection 8237268 for each level of protection. (See 6.1)

MIL-F-81959 - Fixture, Cable Maintenance Mx-9516/Asq-81(V)

The MX-9516/ASO-81(V) Cable Maintenance Fixture, herein after referred to as the equipment, covered by this specification shall be utilized for organizational level use and shall facilitate testing and maintenance of the RL-305A/ASO-81(V) Reeling Machine Magnetic Detector Launching.

MIL-G-50349 - Generator Assembly: 10554892

This specification covers a pulse generator, hereinafter called gate pulse generator, used in Test Set, Subassembly MX-8048/TPM-22, part of Radar Set AN/TPM-22.

MIL-G-50350 - Generator, Signal, 11726304

MIL-G-50351 - Generator: 10558216

MIL-G-50758 - Generator Pulse Assembly, 10556650

MIL-I-22814 - An/Apm-132 Inclinometer Set

The inclinometer covered by this specification shall be for flight line or shop use and shall provide the functions and facilities necessary to measure the alignment of the vertical gyro with respect to the AMCS Aero X1A.

MIL-M-48598 - Motor, Brake Assembly: 11747088

MIL-P-48494 - Positioner, Mirror, Azimuth

This specification establishes the requirements and quality assurance provisions for the Positioner, Mirror, Azimuth, PN 11747020

MIL-P-50346 - Power Supply: 9333063

MIL-R-70589 - Remote Bit Test Set: Ts-4211/Tsm-100B: 9361217

MIL-S-50347 - Simulator, Target 10558244

MIL-S-50348 - Synchronizer, Pulse: 10554894

This specification covers the requirements, examinations and tests for a pulse synchronizer, used in Test Set, Subassembly MX-8048/TPM-22A, part of Radar Test Set AN/TPM-22A.

MIL-S-50750 - Test Set, Laser Rangefinder, Ts-3375/Vvg-1, Ds Level 11738861

MIL-T-21719 - Test Set Mk 339 Mod O

MIL-T-22815 - An/Apm-131 Test Harness, Radar

The kit covered by this specification shall be for flight line, shop use and shall provide the patch cables, or test adapters necessary to operate the specified components as part of the system, and provide necessary test points, when they are removed from their normal mounting position for servicing.

MIL-T-23814 - Transmission, Power, Constant Speed For Use On A-4E/F Aircraft

MIL-T-48466 - Test Set, Cable, Xm21 Computer - An/Vvg-2 Rangefinder - An/Vsg-2 Tank Thermal Sight - 11733300

This specification establishes the performance, design, test, manufacture, and acceptance requirements for the Test Set, Cable XM21 Computer- AN/VVG-2 Rangefinder-AN/VSG-2 Tank Thermal Sight-11733300 (see 6.1).

MIL-T-48586 - Test Set Assembly, Diode Switch: 11736249

MIL-T-48587 - Test Set, Inverter, Converter And Motor Chassis Assembly: 11748238

MIL-T-48593 - Test Set, Sight Current Generator Servo, 11747100, An/Tsm-100

MIL-T-48599 - Test Set, Inverter, Converter Chassis Assembly: 11748234

This specification covers one type of Inverter, Converter Chassis Assembly Test Set, hereinafter referred to as the ??Chassis Assembly?? which forms a part of the Electronics System Test Set type AN/TSM-100.

MIL-T-50331 - Test Set, Subassembly Mx-8046/Tpm-22 Receiver/Transmitter Tester(

This specification covers Test Set, Subassembly MK-8046/TPM-22 hereinafter referred to as receiver/transmitter tester, a part of the Radar Test Set AN/TPM-22. The receiver/transmitter tester makes receiver measurements and provides power and control voltages to test some of the subassemblies in Unit 2 of Radar Set AN/VPS-2.

MIL-T-50332 - Test Set, Subassembly Mx-8047/Tpm-22 (High Voltage Tester)

MIL-T-50333 - Test Set, Subassembly Mx-8048/Tpm-22A (Receiver, Test Panel)

This specification covers the requirements and tests for Test Set, Subassembly MX-8048/TPM-22, hereinafter called Receiver Test Panel. This test panel is part of Radar Test Set AN/TPM-22A. It provides means of testing the receiver of Radar Set AN/VPS-2 (see 6.1).

MIL-T-50334 - Test Set, Subassembly Mx-8049/Tpm-22 (Range Computer Tester)

This specification covers the Test Set, Subassembly MX-8049/TPM-22A hereinafter referred to as range computer tester, which is a part of the Radar Test Set AN/TPM-22A. The range computer tester tests both the search and track modes of the Range Computer CP-888/VPS-2, a part of the Radar Set AN/VPS-2.

MIL-T-50335 - Test Set, Power Supply: Mx-8051/Tpm-22A

MIL-T-50336 - Test Set Subassembly. 10554898 (Pulse Generator)

This specification covers a test set subassembly, hereinafter called pulse generator, used in Test Set Subassembly MX-8050/TPM-22, part of Radar Test Set AN/TPM-22.

MIL-T-50337 - Test Set Subassembly. 10558483 (Card Reader)

MIL-T-50338 - Test Set Subassembly: 11726303 (Test Socket Assembly)

This specification covers a test set subassembly, hereinafter called test socket assembly, used in Test Set, Sub-assembly MX-8050/TPM-22, part of Radar Test Set AN/TPM-22.

MIL-T-50339 - Test Set, Subassembly Mx-8050/Tpm-22 (Printed Circuit Card Tester)

This specification covers Test Set, Subassembly MX-8050/TPM-22A hereinafter referred to as printed circuit card tester, part of Radar Test Set AN/TPM-22A. The printed circuit card tester is used to verify proper operation of printed circuit cards in Radar Set AN/VPS-2 and Radar Test Set AN/TPM-22A.

MIL-T-50340 - Test Set Subassembly: 11726333 (Line Driver A)

MIL-T-50341 - Test Set Subassembly, 11726335 (Line Driver B/C

MIL-T-50342 - Test Set Subassembly, 11726337 (Line Driver D)

MIL-T-50343 - Test Set Subassembly, 11726338 (Low Voltage Filter)

MIL-T-50605 - Tools And Test Equipment, 10559650 (Laser Rangefinder An/Vvs-1)

This specification covers one type of equipment known as Laser Rangefinder AN/VVS-1 Tools and Test Equipment: 10559650 (see 6.1).

MIL-T-50606 - Tester Receiver Transmitter, Laser, 10559600

This specification covers one type of electro-optical unit known as Tester-Receiver Transmitter, Laser: 10559600

MIL-T-50609 - Test Set, Electronic Circuit Plug-In Unit, An/Gvm-8

MIL-T-50752 - Test Set, Subassembly Mx-8046A/Tpm-22A (Receiver/Transmitter Tester)

MIL-T-50789 - Test Set, Air Defense Artillery, An/Mwm-3, 8438880

This specification covers one type of Air Defense Test Set, AN/MWM-3 to be used to Troubleshoot and verify performance of components of the M163 Self-Propelled and the M167 Towed, 20 Millimeter Air Defense Artillery Guns known as the Vulcan Air Defense System, (VADS).

MIL-T-60857 - Test Set, Radar, An/Tpm-22

This specification covers Radar Test Set AN/TPM-22, support maintenance shop set, hereinafter referred to as SMSS, a console and rack mounted test set used by direct support and general support maintenance (3rd and 4th echelons) for testing all items of Radar Set AN/VPS-2 except Antenna AS-2049/VPS-2.

MIL-T-60858 - Test Set, Electronics System An/Tsm-100

This specification covers one type of Electronic System Test Set, hereinafter referred to as the "system test set" which forms a part of the Vulcan Air Defense System (VADS) Direct Support/General Support System.

MIL-T-60876 - Test Set, Servo Amplifier, Ts 2658/Tsm 100A

This specification covers one type of Servo Amplifier Test Set, hereinafter referred to as the "test set" which forms a part of the Electronics System Test Set type AN/TSM-100A.

MIL-T-60877 - Test Set, Distribution Box, T5-2659/Tsm-100

This specification covers one type of Distribution Box Test Set, hereinafter referred to as the "test set", which forms a part of the Electronics System Test Set type AN/TSM-100A.

MIL-T-60878 - Test Set, Sight Current Generator, Ts-2660/Tsm-100A

MIL-T-60879 - Test Set, Power Panel, Ts-2661/Tsm-100A

This specification covers one type of Power Panel Test Set hereinafter referred to as the ??test set?? which forms a part of the Electronics System Test Set type AN/TSM-100A, used on the Vulcan Air Defense Weapon. System.

MIL-T-60880 - Test Set, Control Panel, Ts-2657/Tsm-100

MIL-T-82476 - Test Set, Analog Amplifier Test Set Mark 402 Mod 0 (For Fire Control System Mark 113, All Mods)

MIL-T-82477 - Test Set Relay Mark 403 Mod 0 (For Fire Control System Mark 113, All Mods

MIL-T-82479 - Test Set, Analog Power Supply, Mark 404 Mod O (For Fire Control System Mark 113, All Mods)

QPL-23814-5 - Transmission, Power, Constant Speed For Use On A-4E/F Aircraft

equirements and tests for Test Set, Subassembly MX-8048/TPM-22, hereinafter called Receiver Test Panel. This test panel is part of Radar Test Set AN/TPM-22A. It provides means of testing the receiver of Radar Set AN/VPS-2 (see 6.1).